FAQ and known limits
What to expect, what to work around, and where to ask when something looks wrong.
Install and platforms
Is it really free?
Yes. The A330-200 is freeware for X-Plane 12. You may not sell it or upload the package to other sites. Link to our download page instead.
What do I need besides X-Plane 12?
X-Plane 12.4.4 or newer. The package is a complete aircraft, so you do not need a copy of the default A330-300. No other add-on is required.
Does it work on macOS and Linux?
Yes. This public beta runs on Windows, macOS and Linux, with the plugin included. The Windows plugin is tested. On macOS one tester has flown it, and the Linux plugin is compiled but not yet tested. Please tell us whether they work, through the bug form or Discord.
How do updates work?
With the SkunkCrafts Updater (download and guide) (free, by SkunkCrafts): install it once, then run it before you start X-Plane. It updates only the files of our package and leaves your own liveries, Carda's engine folders and your settings alone. It will not update an aircraft that is currently loaded. You can also install each new complete package by hand; the install page has the steps. The release notes show the current version.
My aircraft disappeared or broke after an X-Plane update.
Check that the Calibra A330-200 folder is directly in Aircraft, not inside Aircraft/Laminar Research, which X-Plane's updater restores. Then install again, as in the install guide.
Can I use liveries made for the A330-300?
No. The −200 has its own fuselage texture layout. Use the paint kit to make or adapt a livery.
How do I know there is a new version?
When the aircraft loads it checks the published version and shows UPDATE AVAILABLE if a newer one is out. Nothing from your computer is sent. You can also use the Check for updates option on the tablet, and release news goes out on Discord.
What is the SimLoad Manager?
SimLoad Manager is an optional tool by Rackham-Sim, a third party, and it is not part of our package. If you use it, the aircraft supports it: boarding and deboarding start from the tablet, with the phases and the doors following SimLoad Manager's events, and the stations always within limits. If you have no profile for this aircraft yet, the aircraft installs one on its first load. Without SimLoad Manager, the tablet loads the aircraft by itself.
Where is the documentation?
The aircraft comes with a flight manual, a quick start, a quick reference, a list of differences from the A330-300, the changelog, the known limitations and the credits. They open on the tablet (Options > Support > Aircraft documents) and are in the Documentation folder of the aircraft.
Is there a tablet in the cockpit?
Yes. The A330-200 comes with its own tablet, an electronic flight bag with your SimBrief plan, weather, load and trim sheet, take-off speeds sent to the MCDU and ground services. The A330-200 page has the details.
GE and PW engines
Why are the GE and PW engines not in the package?
They are free mods by Carda and stay on Carda's download pages. Our package ships with the Rolls-Royce Trent 772B. The install guide shows how to add the other two.
X-Plane shows a warning when the aircraft loads. Is something broken?
No. Without the GE Engines and PW Engines folders, X-Plane warns once per load that objects are missing and the aircraft stays on the Trent 772B.
What is the "CARDA MOD MISSING" box?
You loaded a livery marked GE or PW without Carda's engine folders installed. Add the folders or pick an RR livery.
Why do I see two engines on top of each other?
Remove the GE Engines and PW Engines folders from the aircraft's objects folder. They need the plugin to load.
SimBrief and the FMS
The FMS rejects my zero-fuel weight with "ENTRY OUT OF RANGE".
The X-Plane FMS does not accept a ZFW below 129.0 t. This is fixed in the simulator. For a lighter flight, enter 129.0 on INIT B.
INIT REQUEST loaded the route without a SID or STAR.
That is intended. Choose the departure and arrival procedures in the FMS as usual.
After INIT REQUEST the scratchpad shows "CRUISE FL ABOVE MAX FL".
It is an advisory based on the aircraft's weight at that moment. The cruise level was entered.
INIT REQUEST shows NO PILOT ID, NO OFP or NET ERROR.
NO PILOT ID: no Pilot ID saved yet (MCDU MENU > ACCOUNT, LSK1L, or on the tablet). NO OFP: SimBrief has no flight plan for that ID, so generate one first. NET ERROR: the network or SimBrief did not answer, so try again. The message clears by itself after a few seconds.
INIT REQUEST loaded the route but not the flight number and cruise level.
The scratchpad was not empty. Clear it and enter the two values by hand, or request again.
LOADSHEET shows the weights but does not load them.
It takes two presses. The first shows ZFW and FOB from your OFP. Press again within 30 seconds to load them. Do the REQUEST first, then the LOAD.
LOADSHEET answers "NOT ALLOWED".
It only loads fuel and payload on the ground, with the engines off and the parking brake set.
After 2,500 ft on a FLEX take-off the FMA still shows "MAN FLX +00".
The label is wrong but the thrust is right. It is a known display issue. Nothing to do.
Using the aircraft
Where do I enter my SimBrief Pilot ID, and do I need SimBrief?
On the tablet, in Options > Preferences, or on the MCDU: MCDU MENU > ACCOUNT, type the ID in the scratchpad and press LSK1L. The screen shows only SET or NONE, never the number. SimBrief is optional: without it, use MANUAL LOAD on INIT B, or enter the weights on the tablet.
How do I start the engines?
Put ENG MODE at IGN/START, then ENG MASTER 1 ON, check the idle parameters, then ENG MASTER 2 ON. When both are stable, ENG MODE to NORM. The start follows the sequence of the real aircraft and only runs with ENG MODE at IGN/START: MAN START has no function.
The aircraft stays in SRS after take-off.
Select the departure runway on the F-PLN page. If you load a plan from a .fms file, the aircraft leaves SRS at the runway elevation plus 1,500 ft, or at the THR RED/ACC you entered on PERF TAKE OFF, and accelerates on a managed target.
The thrust levers went to idle at touchdown on an automatic landing.
That is how the simulation works: at touchdown the cockpit thrust levers go to idle by themselves, the autothrust disconnects and the ground spoilers extend, even if your levers are still in CL. On the real aircraft this waits for the levers at IDLE, so set them to IDLE as usual.
What are the voice callouts, and can I switch them off?
The pilot monitoring callouts (THRUST SET, 100 KNOTS, V1, ROTATE, POSITIVE CLIMB, gear and flaps, SPOILERS, REVERSE GREEN, DECEL and more, with the matching warnings) are on by default. Switch them in the tablet Options, under Pilot monitoring callouts.
Can I save a flight and come back to it?
Yes, on the ground or in the air, from the tablet (Options > Saves) or with the commands a330v3/saves/save_now and a330v3/saves/load_latest. A save keeps what X-Plane's own situation file leaves out: the FMS weights and cruise level, the FCU, the autopilot and autothrust modes, the baro settings and the engine masters. In the air the aircraft comes back paused: press P to resume. Autosave is off by default.
Why does the cabin climb with no air coming in?
Cabin pressurization works in AUTO only. With the packs and the bleeds off, the cabin climbs at about 500 ft/min. The LDG ELEV selector and the manual mode have no effect.
What do ICE DETECTED and BRAKES HOT mean?
The ice detector warns: A.ICE ICE DETECTED, and SEVERE ICE DETECTED after seven cycles in a row. It switches nothing by itself, so you switch the anti-ice on. BRAKES HOT appears above 300 °C and clears below 290 °C. The carbon brakes keep heating for minutes after you stop, and the BRAKE FAN halves the indication quickly.
Can I read my own PDFs on the tablet?
Yes. Put them in Output/Calibra A330-200/documents and open them from the Checklist and Documents page, which has text search and the contents of the PDF.
What this version does not do
Where is the full list of known limitations?
On the known limitations page. For each item it says what you see, when it happens and what to do. The same list is on the tablet, in Options > Support.
Are the FMS performance predictions those of the −200?
Not fully. The FMS fuel and time predictions use the default X-Plane performance tables, except for the descent path, and have not been validated against airline data, so they can differ from your SimBrief plan. The take-off performance on the tablet is a separate calculation and is an estimate for the simulator, not for real operations.
Are the cockpit systems new?
Mostly they are the systems of the default A330, flown by X-Plane's own FMS, autopilot and autothrust. We added or reworked engine start, the APU, brakes, batteries, ice detection, cabin pressurization, packs and bleed, the take-off and landing logic and more. The differences page lists them item by item.
The fuel burn or the times differ from my SimBrief plan.
The FMS uses the default performance tables (except for the descent path), which have not been checked against airline data, so its predictions differ from SimBrief. Plan with the OFP and keep FUEL BIAS at 0 in your SimBrief airframe profile. If the predicted EFOB falls below FINAL RESERVE plus ALTN, divert.
I do not see the inlet mist.
It needs humid air (it starts above 60 % humidity and is full at about 90 %), N1 above 70 % and less than 1,500 ft above the ground. It is subtle in daylight.
The route disappears under the weather radar on the ND.
The outer ring of the ND brightness knob dims the radar image. Turn it down and the route shows on top.
The autothrust hunts in gusts and managed descent is uneven.
Both come from X-Plane's own FMS and autothrust. In the descent, flying a selected speed or a selected V/S or FPA is a good workaround. The known limitations page has the details.
Help, bugs and repaints
Where do I report a bug or ask for help?
Open a report on our support tracker or ask on Discord or in the X-Plane.org forum topic.
Before you report, test with third-party plugins disabled and check whether it also happens on the default A330-300.
On the tablet, Options > Support > Save debug report writes a report of the aircraft state and the flight log. Nothing is sent automatically. Attach it, with version.txt and the Log.txt from the same session, and tell us your X-Plane version, operating system and engine. Log.txt shows folder paths from your computer, so remove anything you do not want to share. The channels are public.
Can I publish my own livery?
Yes, repaints are welcome. Put RR, GE or PW in the livery folder name so the right engine loads. The paint kit is a separate download.