A330-200 · v1.0.0-beta.4

Install

A complete aircraft: extract the zip and move one folder into Aircraft. You do not need a copy of the default A330-300.

You need

Requirements

  • SimulatorX-Plane 12.4.4 or newer. Tested on X-Plane 12.4.4; older versions are not supported.
  • AircraftPublic beta: Windows, macOS and Linux.
  • PluginWindows (tested), macOS (flown by one tester) and Linux (compiled, not yet tested). It provides SimBrief in the MCDU, the tablet, the engine switch and the A/C STATUS page.
  • SimBriefOptional. A free account and your Pilot ID, for the MCDU functions.
  • Other add-onsNone required. The GE and PW engines are optional free mods by Carda (see below). Without them the aircraft flies on the Trent 772B.
  • DownloadAbout 801 MB (Calibra_A330-200_v1.0.0-beta.4.zip). About 1.9 GB once installed.
The package

What is in the box.

Included

  • The A330-200 with the Rolls-Royce Trent 772B
  • White livery
  • Four 8K liveries: Calibra Simulations House PP-CAL, Virgin Australia VH-XFJ, SWISS HB-IQA and Air France F-GZCL
  • Plugin: SimBrief in the MCDU, the tablet and the engine switch

Downloaded separately

  • GE CF6-80E1 and PW4000 engines: free mods by Carda, from Carda's pages
  • Paint kit
  • Optional packs: VRAM Friendly Pack (2K textures, about 400 to 460 MB less video memory), Cockpit Pantone 5415 C and Clean Glasses

The SWISS and Air France liveries are set up for the PW and GE engines, which need Carda's mods and the plugin. Without them they fly on the Trent 772B. The house livery and Virgin Australia use the included Trent 772B.

Aircraft

Three steps.

  1. Extract the zip.
  2. Move the Calibra A330-200 folder into X-Plane 12/Aircraft/.
  3. Start X-Plane and load Airbus A330-200. Your default A330-300 is not changed.

Put the folder directly in Aircraft, not inside the Laminar Research folder, which X-Plane's own updater manages.

macOS and Linux: the plugin is in the package. On macOS it has been flown by one tester, and it loads and SimBrief works once the quarantine block below is cleared. The Linux plugin is compiled but not tested: we have not been able to fly it. SimBrief and the weather pages use the system curl command. If the plugin does not load, the aircraft still flies, but without SimBrief in the MCDU and the engine selector: use the Rolls-Royce Trent and RR liveries only, and do not copy the GE and PW engine folders.

macOS: the plugin is not signed by Apple, and macOS may refuse to load a file downloaded from the internet. If X-Plane says the plugin cannot be opened, open Terminal after installing and run this, with your own path to the aircraft folder, then restart X-Plane. It only removes the download mark from the files of this folder. Or load the aircraft once, then in System Settings > Privacy & Security click Allow Anyway for mac.xpl.

xattr -dr com.apple.quarantine "/Applications/X-Plane 12/Aircraft/Calibra A330-200"

First flight

From the install to take-off.

  1. Tap the dark screen of the tablet on your side console to switch it on. In Options > Preferences, enter your SimBrief Pilot ID (or on the MCDU: MCDU MENU > ACCOUNT).
  2. On the tablet, Ground > Aircraft state: choose External power on, or APU on with the IRS aligned.
  3. In SimBrief, generate an OFP for the aircraft type A332. On the MCDU INIT page press INIT REQUEST and wait for LOADED. Then select the departure runway, the SID and the STAR on the F-PLN page.
  4. With the parking brake set and the engines stopped, load fuel and payload with LOADSHEET on the MCDU, or from Weight and balance on the tablet.
  5. On INIT B enter ZFW and BLOCK, if the tablet option to fill them is off. With a ZFW below 129.0 t, enter 129.0.
  6. Open PERF TAKE OFF on the MCDU, then on the tablet, Performance > Takeoff: check the runway and press Send to MCDU.
  7. Start the engines with ENG MODE at IGN/START, then take off: thrust to FLX or TOGA, rotate at VR and release the sidestick gradually.

The quick start and the flight manual open on the tablet, in Options > Support > Aircraft documents, and are in the Documentation folder.

Optional

GE and PW engines.

The GE CF6-80E1 and Pratt & Whitney PW4000 are free engine mods by Carda. They are not in our package.

  1. Download the mods from Carda's pages on Threshold (login required): GE CF6-80E1 and PW4000.
  2. From each download, open JAR330 Base Folder/objects/ and copy the GE Engines or PW Engines folder into the objects folder of your A330-200. The package holds empty placeholder files with the same names: choose replace for every file.
  3. Load the aircraft. On the first load it adapts Carda's files to the A330-200 (wing flex, engine vibration, fan blades, PW pylon) and keeps the originals as .bak. Then choose the engine.

Without Carda's engines the aircraft works normally with the Trent. A livery made for GE or PW then shows a "CARDA MOD MISSING" box for 30 seconds. This is expected.

In the sim

Choosing the engine.

By livery
The tag RR, PW or GE in the livery folder name selects that engine when you load it, for example [A332 GE] Air France F-GZCL.
By menu
Plugins → A330-200 by CalibraSim → Engine.
Default
Rolls-Royce Trent 772B.
Check
The MCDU page DATA > A/C STATUS shows A330-200 and the engine selected.
Updates

New versions.

Updates come through the SkunkCrafts Updater, a free tool made by SkunkCrafts (a third party, not part of our package). It keeps this aircraft up to date and shows what changed in each version.

  1. Install the SkunkCrafts Updater (download and guide) once, from SkunkCrafts' own page. It runs on Windows 10/11 (64-bit), macOS 12 or newer and Linux (glibc 2.35 or newer).
  2. Our package already contains the file skunkcrafts_updater.cfg, so the updater recognises the aircraft by itself.
  3. Run the updater before you start X-Plane, or while another aircraft is loaded. It does not replace an aircraft that is loaded.

What it changes: only the files of this package. Your own liveries, Carda's GE Engines and PW Engines folders and your settings (including your SimBrief Pilot ID) are not touched. If you edited a file of our package, the updater restores it. A livery of ours that gets updated is replaced.

First run: Windows may show a SmartScreen warning ("More info", then "Run anyway"). The macOS app is not notarized by Apple: right-click it and choose Open, or allow it in Privacy & Security.

If something goes wrong, the updater writes a log at X-Plane 12/Output/skunkcrafts/updater/updater_log.txt. Send it with your report.

Prefer to do it by hand? Every version is also a complete package: delete the old Calibra A330-200 folder and install the new one. Before deleting it, keep your GE Engines and PW Engines folders and any liveries you added, and put them back afterwards.

See the release notes for what changed. Release news goes out on Discord.